What inspection measures need to be paid attention to before starting the laser cutting machine?
What inspection measures need to be paid attention to before starting the laser cutting machine? Normaltan China recommends that you check the following items before starting the equipment, which can ensure the safe use of the machine, prolong the service life of the equipment, and save equipment maintenance costs.
Check the machine bed
Before starting the equipment every time, the circuit, machine cover, main power supply, voltage stabilizing equipment, air cooler, laser, and auxiliary systems of the laser cutting machine need to be checked to ensure that everything is normal. Every time the equipment is used, it is necessary to clean the bed of the equipment after turning off the power to prevent dust or residue from entering the machine and ensure the cleanliness of the equipment.
Check the protective lens of the cutting head
Checking protective lenses is an important part of the job. Normaltan China recommends that you clean the lens before turning on the machine every time. The cleanliness of the lens has a direct impact on the cutting quality of the laser cutting machine.
If the lens of the cutting head is not cleaned in time, it is easy to cause damage to the cutting head. The lens can be cleaned according to the maintenance manual of your equipment. The flat lens can be cleaned with lens paper, and the curved lens can be cleaned with a cotton swab. For details, please refer to the instruction manual for your equipment model.
Detect coaxial center
To ensure the coaxially between the nozzle exit hole and the laser beam, the cutting quality of the laser cutting machine can be guaranteed. You can use scotch tape with a ‘small nozzle’ for precise testing. Avoid damage to the nozzle due to low concentricity
Check the chiller
Before starting the laser cutting machine each time, be sure to check whether the water level of the chiller is normal and whether the filter is blocked by foreign objects.
Regular equipment dust removal and replacement of circulating water can ensure the normal operation of the equipment.
To sum up, laser-cutting machine operators should check the condition of each component before turning on the machine every time. Ensure the safe operation of the machine and avoid machine failures. NORMALTAN CHINA insists on professional service and quality. You are welcome to inquire at any time (email@example.com).